Skip to main content
Dry fit of seatback panels. The port side is too lond and needs trimming on the fore endto match the angle of the cabin back. The starboard side is a little too short but only 1/4 inch so it can be fixed by positioning halfway and extra epoxy. Next is planning the seatback stringer tops level.



Comments

Popular posts from this blog

Portholes finished!!

 

Pocketship finished except sailing hardware.

 Have her finished except for the installation of the sailing hardware package.  Had to fix the bunks on the trailer to fit her perfectly.  She tows very well. 

Waterline struck and first coat.

 Figured out how to strike the waterline with the laser level. I just didn’t have the laser level back far enough Then got the first coat done and it looks good so far.  Pettit EZPoxy Electric Sapphire blue with additive. Using roll and tip.