Skip to main content
Marked the underside of the Seatback tops and trimmed them with a jig saw.
This will I hope make the routering easier after they are glued down.
Also put 1st coat of unthickened epoxy on the underside of the tops.




Comments

Popular posts from this blog

Bowsprit install.

Bowsprit install.
Had to add this link to YouTube videos of pocketship perfecto for future reference. https://m.youtube.com/watch?v=giYUtFamjcU https://m.youtube.com/watch?v=giYUtFamjcU

Painting the final coat on bottom Starboard side.

Painting the final coat on bottom Starboard side.