Skip to main content
Friday evening, Feb 3, I glassed the companionway hatch cover. Also did 2 hours of sanding the cockpit area glass that is already laid to get ready to lay the last piece which is in the cockpit footwell.
Also have to lay two pieces on the outside wall of the back bulkhead of the cabin. Then all the fiberglassing of topsides is done. It will be hours then of sanding and recoating with epoxy to get a good even dull gray sanded finish ready for painting.

Comments

Post a Comment

Popular posts from this blog

Pocketship finished except sailing hardware.

 Have her finished except for the installation of the sailing hardware package.  Had to fix the bunks on the trailer to fit her perfectly.  She tows very well. 
Post a Comment
Read more

Painted the cabin.

 
Post a Comment
Read more

OLD BLOG (July 2009)

Wednesday, July 29, 2009 No Time!! I was hoping to get more than this done. I'm off to Newfoundland to look into my family boatbuilding past for a few weeks. last work was to glue up half of the keel. Next need to coat the inside with epoxy and glue up the other side. When I get back hope to pour the lead. Found out why Dave had the problem with the curve in the keel. If the blocking goes from 3/4 to 1 and 1/2 up to the centerboard trunk and this is glued flat to the table then there will naturally be a curve. I hope that by putting a wedge under the keel while glueing will solve this....Will let you know!! What a marvelous noseblock I have planed!! Posted by Cliff at 7:06 PM 0 comments Thursday, July 23, 2009 Last evening milled the blocking for the centerboard trunk, and then glued them. Also cut pieces for the noseblock and glue...
Post a Comment
Read more