Skip to main content
First entry in a long while. I did some fiberglassing in the fall
on the footwell.  This completes the top sides fiberglassing.
Today, Jan 20,3019 I spent a few hours retweaking the pieces for the
companionway hood and glued it up. Notice in the third picture you can see the braces I had to use to prop up the cabin top so the sides of the companionway hood fit properly and there is no gap between them and the cabin top. Noticed the John Bratton in the blog "The Pocketship Yard" had the same problem.


Comments

Post a Comment

Popular posts from this blog

Pocketship finished except sailing hardware.

 Have her finished except for the installation of the sailing hardware package.  Had to fix the bunks on the trailer to fit her perfectly.  She tows very well. 
Post a Comment
Read more

Painted the cabin.

 
Post a Comment
Read more

OLD BLOG (July 2009)

Wednesday, July 29, 2009 No Time!! I was hoping to get more than this done. I'm off to Newfoundland to look into my family boatbuilding past for a few weeks. last work was to glue up half of the keel. Next need to coat the inside with epoxy and glue up the other side. When I get back hope to pour the lead. Found out why Dave had the problem with the curve in the keel. If the blocking goes from 3/4 to 1 and 1/2 up to the centerboard trunk and this is glued flat to the table then there will naturally be a curve. I hope that by putting a wedge under the keel while glueing will solve this....Will let you know!! What a marvelous noseblock I have planed!! Posted by Cliff at 7:06 PM 0 comments Thursday, July 23, 2009 Last evening milled the blocking for the centerboard trunk, and then glued them. Also cut pieces for the noseblock and glue...
Post a Comment
Read more