Spent 3 hours tonight figuring out I should have started at the bow end of the toerail and screwed it down first and then bent the toerail as I screwed it on working aft. Mixed up thickened epoxy and glued it down. Also measured and cut the holes for the cowl vents tonight. From my reading of different blogs and the CLC plans it seems they are 4" back from the bow end of the dorade box but in slightly different positions for different builders. I put mine 4" back, and 3" from the outside edge, 2 5?8" from inside edge. Also sanded the starboard cockpit seat, and cut the fiberglass for it. Will wet it out another day!
Comments
Post a Comment