Skip to main content
Used brass screws to fasten together the sides on the hatch cover and then glued down the plywood top with thickened epoxy. Its finished Cut out the groves in the sides of the Hood for these rails to run in.






Comments

  1. Should say its finished except for fiberglassing the top and putting on the plastic sliding rails.

    ReplyDelete

Post a Comment

Popular posts from this blog

Bowsprit install.

Bowsprit install.
Had to add this link to YouTube videos of pocketship perfecto for future reference. https://m.youtube.com/watch?v=giYUtFamjcU https://m.youtube.com/watch?v=giYUtFamjcU

Painting the final coat on bottom Starboard side.

Painting the final coat on bottom Starboard side.