Skip to main content

Mast glue up




 Well that was the hardest job I’ve done since I started this pocketship. I milled up the blocks for the base and top of the mast and then spread unthickened epoxy on the inside of all four staves.  Made up thickened epoxy and coated the mating surfaces. I used 20+ clamps and probably 30 or more screws.  

We shall see. :)

Comments

Popular posts from this blog

Bowsprit install.

Bowsprit install.
Had to add this link to YouTube videos of pocketship perfecto for future reference. https://m.youtube.com/watch?v=giYUtFamjcU https://m.youtube.com/watch?v=giYUtFamjcU

Painting the final coat on bottom Starboard side.

Painting the final coat on bottom Starboard side.